Monobloc Office Container

Monobloc office containers are designed for site organisation, workplaces, company headquarters, trade fair and exhibition presentations, monobloc container invoicing office, living containers, site tracking, production, etc.

The monoblock range of office containers cannot be combined with other containers, but have the advantage of a very good price and are recommended where a single office container is sufficient.

We produce monoblock office containers in different sizes e.g:

office containers with lengths of 1.5m / 3m / 4m / 6m / 9m
double and triple office containers.

We have the best prices on monoblock office containers.

Construction

Metal structure

The poles are cold-formed from galvanised sheet metal with a material thickness of 2.5 mm, side dimensions 165/190 mm.
Poles are cold-formed from 2.5 mm thick galvanized sheet metal, side dimensions 165/190mm
Static calculation of the steel structure according to EN standards.
Type of steel used S235JO
Cold rolled galvanised structure with water drainage channel and 50 mm diameter drain pipes located in the 4 corners of the container insulated with mineral wool to prevent freezing

Anti-corrosion protection

Anti-rust protection
Profiles are degreased with thinners and then painted

Metal frame and panel colour

The metal frame is painted with special paint for galvanised surfaces
Standard colour of the metal frame is Ral 9002 white/grey (other colours from the paint supplier’s palette can be applied on request)
The thickness of the paint layer after drying is minimum 80 microns

Roof

Galvanised double folded board (0,5 mm)
Cross beams 2 mm thick
10 micron PVC waterproofing film
Mineral wool 100 mm C1 standard Thermal conductivity ?=0.33w/mk
16 mm thick white melamine coated wood (pop-riveted and masked with ceiling colour masking)
U =0.39 W/m2.K
Electrical installation with 3×1.5 myym cable

Exterior walls

Sandwich panels
The standard colour of the sandwich panels is RAL 9002 but on request it is possible to order panels in the desired colour for quantities of more than 250 sq.m. (1 modular container approx. 40 sq.m.)
60 mm thick with PUR polyurethane foam, 2 mm deep folded outer surface
Ral 9002 interior colour, smooth surface/Ral 9002 exterior colour, folded surface
Thermal conductivity ?=0.33w/mk;
Sound insulation 33-34 db, according to ISO L40/V; fire resistance class B1

Doors
Metal or PVC
With safety cylinder dimensions 900/2050 mm, 40 mm thick
2 hinges support
Colour Ral 9010 exterior (can be painted according to paint supplier’s colour palette on request, at extra cost)/ interior

Windows
PVC double-glazed with roller shutters and mosquito nets on request
White colour (can be painted according to the paint supplier’s colour palette on request, at extra cost)
Insulated glass 4/16/4
Window location 900mm from interior floor
Thermal insulation of doors and windows k=2.8 w/mpk

Floor

2.0 mm thick cold rolled metal structure
H12 (0.5 mm) galvanised sheet metal, folded to the lower frame
2 mm thick galvanised side rails
100 mm c1 standard mineral wool
19mm thick water-repellent Pal Pal interior flooring
2 mm thick homogeneous traffic linoleum glued over the entire floor surface and welded with a weld seam
Maximum load-bearing capacity is 450 kg/m2.

Electrical installation

External CEE connectors recessed in the top frame of the container
External 230V / 400V sockets, on request also 380V differential sockets can be fitted
Working voltage 230V
External earthing socket with M10 screw and nuts on 2 corners of the container
Automatic fuse panel with earthing system
Sockets located according to customer requestSwitch located next to the door
Illumination provided by 2 x 18W neon lamps (or 2 x 36W on request) with ip housing, 40 dustproof

Additional accessories if required